en
During the previous year, many projects were initiated and implemented by us. Within each project, multi-faceted analysis, actual design work, preparation and optimisation of the production chain, clarification of the ways of acquisition of components, emphasising on the options available in the local market, laboratory and field tests, and work of creating quality control mechanisms were carried out.
The Tactical Print lab was founded by Simon Hovhannisyan, Artur Harutyunyan and Davit Badikyan, participants of the 2020 large-scale war.
We cooperate and/or are in constant contact with all the structures and initiatives that back our sovereignty and operate in the Republic of Armenia.
A 3D printed tourniquet based on Glia's Gaza project.
The history of 3D printed tourniquets begins in 2016, within the framework of the Glia GAZA project in the Gaza Strip.
Taking into account the practical experience built up over the years and the certifications issued by many prestigious medical organisations/institutions, we have updated the results of open research, improving the weak links of some solutions. Moreover, thanks to the cooperation with the ZGST workshop, which produces high-quality military equipment, it was possible to ensure the best balance of affordability and reliability, using only materials of the highest quality and reliability.
In the case of 2000+ volume production, it is possible to set a price of $21 or 8000 AMD for one piece.
In the case of 10000+ volume production, it is possible to set a price of $18 or 7000 AMD for one piece.
The project is also prepared for mold casting production.
In that range it is possible to produce 100000+ quantities at even more affordable prices.
3D printed bandages for injuries.
Based on similar experience gained by Prusa Resarch in a model series integrated during the military operations initiated by the Russian aggression in Ukraine, average production values by volume range from $5 or 2000 AMD to $10 or 4000 AMD.
The project is also prepared for mold casting production.
In that range it is possible to produce 100000+ quantities at even more affordable prices.
Templates for safe and quick use of injections/syringes.
In a conflict zone, it is necessary to carry many essential medicines ready for injection. These molds allow you to safely carry the syringes and use them as quickly as possible if necessary.
In the case of 3000+ volume production, it is possible to set a price of $3,5 or 1500 AMD per piece.
The project is also prepared for mold casting production.
In that range, it is possible to produce large quantities at even more affordable prices.
Video
A model of the modernisation of the “ALPHA” combat tourniquet.
A model of the modernisation of the “ALPHA” combat tourniquet, which was designed by us, solves one of the most dangerous main defects of the old Russian tourniquets that are widespread in Armenia.
In the case of 200+ volume production, it is possible to set a price of $2,5 or 950 AMD per piece.
Grenade launchers for UAV-launching.
A solution that has proven its effectiveness on the Ukrainian front, which can be produced only by FDM printing.
In the case of 100+ volume production, it is possible to set a price of $0,9 or 350 AMD per piece.
* All the necessary tests were also run by us.
Launch mechanisms from UAVs.
Also a solution that has proven its effectiveness on the Ukrainian front, which can be produced only by FDM printing.
It is possible to remodel for use with different UAV types with various purposes.
In the case of 100+ volume production, it is possible to set a price of $42 or 16000 AMD per piece.
* All the necessary tests have been conducted.
Suncross (Arevakhach) AK charger handles.
Handle of charging mechanism.
It is intended for arranging the most uncomfortable or non-ergonomic part of AK74/M/Saiga series weapons.
It is installed with the help of Epoxy or other similar resin and fixing screw.
Increases the charging speed and protects the human hand from possible injuries.
In the case of 100+ volume production, it is possible to set a price of $10 or 4000 AMD per piece.
The project is also prepared for mold casting production.
In that range, it is possible to produce large quantities at even more affordable prices.
Ultralight storage boxes.
AK series of 7.62 x 39mm ultralight storage boxes.
* All necessary tests have been conducted.
Weight without spring: 118g
Capacity: 30 pcs
* Also has a comfortable contact surface - Micro Camo Pattern.
In the case of 100+ volume production, it is possible to set a price of $23 or 14000 AMD per piece.
Kamikadze FPV type drones/UAVs
FPV drones of different capacities and capabilities.
Depending on the configuration and importance, it is possible to supply light and simple attack drones worth $2000-$5000 to solve quite serious problems.
* For security reasons, information about this project is not subject to public disclosure
TES - series of night vision equipment
Objective;
Observation in low visibility (night) conditions, as well as ensuring the movement of combat units and equipment without the use of flashlights and/or headlights.
TES-M1
Intended for providing night video surveillance of trucks, passenger vehicles, and armoured vehicles of any year and model.
Consists of three main items;
- Camera
- Protective case and tripod
- Screen
Installation;
The installation process, depending on the model, can be optimised by observing the following principles;
The screen and the camera are placed directly in front of the driver, on a straight line, while maintaining the driver's normal field of vision in daytime conditions.
The factory battery of the car is used as the power source of the device.
The system is started with one touch. The switch is placed within the reach of the driver's hand.
Visibility;
Under the above minimum lighting conditions, the device provides a field of view of up to 100m, allowing the driver to maneuver while maintaining an average speed of movement.
Comparison under similar lighting conditions.
Compilation
All the components used in the device are available in several markets, are on free sale, do not have dual meaning.
USA, India, China.
With the acquisition of the above mentioned components and the creation of the corresponding production flow line, the mentioned equipment in Armenia will cost 1300$ in case of 1000x order.
